Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Automatic answering when picking up receiver

Status
Not open for further replies.

Spragers

IS-IT--Management
Sep 21, 2023
8
0
0
US
Hello,

I've inherited a Nortel BCM50 system and am trying to change some settings. Found a lot of info online but this has me stumped. We have two lines and about 10 extensions. On some of the extensions, if either line rings, you simply pick up the received to answer. On others, you have to manually select the line you are answering first. What setting would I need to change to enable (or disable) the automatic answering feature?

Thanks!
 
Only phones that have lines programmed to ring will work that way.
If they don't ring then the phone (handset lift) wont know what line to answer.




small-logo-sig.png


=----(((((((((()----=
Toronto, Canada

Add me to LinkedIN
 
Thanks! I was able to figure out what to change to get that extension to ring by looking at the settings for one of the other extensions.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top