I have an S8300 Multivantage 1.3 with an IA770 1.1. I just completed a firmware upgrade on everything in the system (S8300 patch, IA770 patches, MM boards, MGP, P330). I check version compatibility left right and center and made sure I wasn't upgrading with firmware that wasn't compatible.
Everything works fine, except one thing. Internal calls that terminate on the SpectraLink Wireless phones. They are not IP phones, they are the DCP wireless phones. They do NOT have their own call-appearances, but instead have 3 bridged-appearances of the primary station (which IS an IP Phone). That way when someone calls me at my desk, it rings my wireless phone too. This is how it was advertised to work, and it was working just fine before the upgrade. Now when you call INTERNALLY to my desk extension, but answer it on the wireless phone, a second incoming INTERNAL call will NOT go to VM. It gives me the coverage tone, but then I just get dead air. It functions normally if it's an outside call, or if I answer the internal call on my desk phone.
WEIRD! Any thoughts!
Thanks!
Everything works fine, except one thing. Internal calls that terminate on the SpectraLink Wireless phones. They are not IP phones, they are the DCP wireless phones. They do NOT have their own call-appearances, but instead have 3 bridged-appearances of the primary station (which IS an IP Phone). That way when someone calls me at my desk, it rings my wireless phone too. This is how it was advertised to work, and it was working just fine before the upgrade. Now when you call INTERNALLY to my desk extension, but answer it on the wireless phone, a second incoming INTERNAL call will NOT go to VM. It gives me the coverage tone, but then I just get dead air. It functions normally if it's an outside call, or if I answer the internal call on my desk phone.
WEIRD! Any thoughts!
Thanks!