Speaker phone button Lost

[ChrisWJackson]

I have a 0x32 system running SW5.0 I mostly use T7316E phones on the system. The one phone that I use to do most programming with the system happens to be the only T7316 phone I have on the system. The other day I was programming this phone and didn't know it at the time but somehow deleted the speaker phone button that used to be programmed to the lower right indicator button. I then copied the programming from this phone to all the phones on the system. Well now the speaker phone button is missing and been replaced with an intercom button system wide. I have turned the system off and on to do the startup and reset system memory but the speaker phone button is still missing. Is there any way to get it back? Thanks for any help.

 

[ChrisWJackson]

Also looking at the User Prefernces for the telephones it shows up as a Model M7310. Is that normal? I do have a couple of M7310 telephones that I might have copied programing from in the past.

 

[bwtc]

The T7316 shows up on all S/W versions as a M7310. The T7316 shows up as a M7310 up to version 6.0 (or 6.1) of the software.

Go into system programming
Terminal & sets
Capabilities
Handsfree (This is probably set as None. Change to Auto or Std)

 

[bwtc]

Sorry... should have been "T7316E shows up as Mt7310 up to version 6.0 (or 6.1)

 

[ChrisWJackson]

That took care of the problem. Thanks alot

Chris