Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
SIP Trunks
- Thread starter MitelAU
- Start date
Asked the same question a couple of weeks ago.
Slapin appears to be the only one.
Bleeding edge stuff.
*******************************************************
Occam's Razor - All things being equal, the simplest solution is the right one.
Slapin appears to be the only one.
Bleeding edge stuff.
*******************************************************
Occam's Razor - All things being equal, the simplest solution is the right one.
waterninja
Programmer
I have got my MX controller talking to a call manager but i am unsure on the version right at this point in time.
it took about 10 minutes to setup
it took about 10 minutes to setup
becca1jane
MIS
Here's a doc from Cisco's site for using SIP between a 3300 7.1 and a Cisco UCM 6.1 which might be helpful:
- Status
Similar threads