Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SIP tie trunk to PRI not sending 10 digit ANI

Status
Not open for further replies.

john8lee

Technical User
Dec 22, 2008
45
US
Hey All,
I have configured some SIP endpoints for testing on a Cm 5.2.1 with System/Session manager 6.3. i am able to call the SIP endpoint DID from outside. All of the internal calling and external dialing is working the only issue I have is the only ANI I get (to an AT&T Cell Phone) is +1(28)00, which is the 4 digit extn created. i am using OPS to build the station side piece.
i have the following built
Per Station CPN - Send Calling Number? y
Numbering Format: unk-pvt
UUI Treatment: service-provider

Replace Restricted Numbers? n
Replace Unavailable Numbers? n
NUMBERING - PRIVATE FORMAT
Ext Ext Trk Private Total
Len Code Grp(s) Prefix Len
4 2800 5 678501 10
NUMBERING - PUBLIC/UNKNOWN FORMAT
Total
Ext Ext Trk CPN CPN
Len Code Grp(s) Prefix Len
4 28 678501 10
11:13:30 SIP<INVITE sip:9770XXXxxxx@jhs.local SIP/2.0
11:13:30 Call-ID: 147_5aaa4fd-7ac934575eb34738_I@172.22.4.125
11:13:30 active trunk-group 5 member 1 cid 0x3409
11:13:30 dial 9770 route:HNPA|ARS
11:13:30 term trunk-group 1 cid 0x3409
11:13:30 dial 9770XXXxxxx route:HNPA|ARS
11:13:30 route-pattern 1 preference 1 location 1 cid 0x3409
11:13:30 seize trunk-group 1 member 116 cid 0x3409
11:13:30 Setup digits 770XXXxxxx
11:13:30 Calling Number & Name NO-CPNumber NO-CPName
11:13:31 Proceed trunk-group 1 member 116 cid 0x3409
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top