I'm trying to configure our SIP Softphone, or any softphone for that matter, using the UCA client. It seems to work perfectly if I stay on the same network as my MAS and 3300, but when I leave the office, it just shows "Active device is offline" when switching to the softphone. I've played with checking off SIP Softphone, unchecking it, enabling Teleworker Softphone, and I just can't get it to work. Any ideas on where I can proceed to look next?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
SIP Softphone
- Thread starter piggy14
- Start date
Versions ? pabx type ?
do you have a MBg server ?
What are you running the client on ? windows android? IOS?
With all posts you will get a much better response if you start with as mush system information as possible
If I never did anything I'd never done before , I'd never do anything.....
do you have a MBg server ?
What are you running the client on ? windows android? IOS?
With all posts you will get a much better response if you start with as mush system information as possible
If I never did anything I'd never done before , I'd never do anything.....
- Status
Similar threads
