SIP configuration

[letron]

Trying to setup SIP phone/ fax using Quintum Tenor AS, in NRS not sure what the L1 directyory # [DN] prefix is, is this number assigned some were already, or do i have to assigne a #, i seem to have everthing programmed correctly, just not able to see end point when in active mode.

Thanks for input

 

[dlesap]

Did you define the SIP phone in User Endpoint tab?
Do you have a SIP trunk in the PBX to the SS?

 

[letron]

yes and yes, and i have double posted, my apologies getting major pressure to get unit working for this site,have spent way to much time on this.

 

[dlesap]

Nortel gave a homologation for one SIP phone model only but not Quintum...
Into the SIP signalisation there is a sequence needed to work with Nortel SS.