Short code for AA test on EVM

[Bas1234]

Hello,

Is it possible to create a short code for testing the AA?

the first AA is a language selection (press 1 or 2)

Action 1 or 2 go to a new AA menu with more action wich do a blind tranfer to a group or an extension

Normally you can test it by route it thru the incomming call route, but i dont have Trunks to test it.

greetzzz....Bas

___________________________________________
It works! Now if only I could remember what I did...
___________________________________________

 

[amriddle01]

You create a shortcode, feature - Voicemail collect telephone number - "modulename"

ACS - IP Office Implement

 

[amriddle01]

Better example - Short Code: *100

Telephone Number: "conferenc"

Feature: VoicemailCollect


ACS - IP Office Implement

 

[amriddle01]

Ignore that You said embedded!! lol

ACS - IP Office Implement

 

[djuplift]

shortcode= *90
Feature= Voicemail Collect
Telephone number = AA:AANAME


for embedded AA testing.

 

[djuplift]

srry feature = Auto Attendant not Voicemail collect

 

[djuplift]

 

[Bas1234]

I have a IP500 version 4.1(9)

the AA:MainAA wont work, it used to be but not in this release the only thing i get is the voicemil box of tha name and not the options menu from the recorded message *8401

greetzzz....Bas

___________________________________________
It works! Now if only I could remember what I did...
___________________________________________

 

[djuplift]

MainAA is the name of the auto attendant i had created, you must replace MainAA with the name of your AA

Example:

AA:MyNewAA

 

[Bas1234]

I know djuplift, but i think i've found it.
The problem is in the recording, when i record a text under *8401 then i do a playback and a save text then i disconnect then again i dial *8401 and the recorded text is gone. So that would explain why the wrong text is played.

Tomorrow i'll try to upgrade the new text files on the EVM.

greetzzz...Bas

___________________________________________
It works! Now if only I could remember what I did...
___________________________________________

 

[Bas1234]

Upgrading did the job, first it looked like it didn't work at all. But a reboot of the IP500 solved everything

thanx for the quick replies.


greetzzzz....Bas

___________________________________________
It works! Now if only I could remember what I did...
___________________________________________