Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Sending Name display from op11

Status
Not open for further replies.
omarrj

omarrj

Technical User
Joined
Aug 28, 2002
Messages
126
Location
CA
option 11 rls 25.40 any special programming to send name display when calling out, other than programming the d-channel for ND2
 
Sort by date Sort by votes
The major requirement for CPND to pass is that both sides of the trunk 'understand' the IEs that are being delivered. What's the destination that you're sending to? Another M1 or DMS?
 
Upvote 0 Downvote
it's going to a 5ess switch and then to wherever they call
 
Upvote 0 Downvote
Name display over the PSTN is a very tricky proposition indeed. If you deliver the Name to the 5ESS, then the 5E has to 'agree' with whatever switches are down-stream in the call path. This 'agreement' is not very likely for the full path of the end-to-end call. Tie lines are a different story, however.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

MoJHK
  • Locked
  • Question Question
Nortel 2250 2/4 line display mode
Replies
1
Views
420
Firebird Scrambler
Firebird Scrambler
phonetech2012
  • Locked
  • Question Question
internal call over tie line sending wrong digits
Replies
2
Views
480
bignose21
bignose21
jtr4580
  • Locked
  • Question Question
Paging Trunk from Cloud Based System to a Carehawk School System
Replies
0
Views
493
jtr4580
jtr4580
LittleMaster
  • Locked
  • Question Question
Restoring data from secondary
Replies
5
Views
567
Firebird Scrambler
Firebird Scrambler
BCU
  • Locked
  • Question Question
Caller id is not getting displayed
Replies
3
Views
815
gbtac3
gbtac3

Part and Inventory Search

Sponsor

Back
Top