IPStanding
Vendor
Is it possible to save speed dials on IP phones? were going to switch a bunch of phones from static to DHCP and was wondering if there was a way to keep all the memory. i can do this on the ECG CM Phones using a FTP server.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
saving flash memory on 56xx IP Phones
- Thread starter IPStanding
- Start date
- Status
yes it is possible
you need a ftpserver to do it
you can change the 46xxsettings.txt file
then it can backup to the ftp server and your speeddails and calllogs are saved
all the settings on the phones are also saved
here an example of a 46xxsettings.txt file for ftp
## 4600 Site Specific `Settings
SET FTPUSERSTAT 1
SET L2Q 2
SET SYSLANG English
SET AGCHAND 0
SET AGCHEAD 0
SET AGCSPKR 0
SET OPSTAT 110
SET FTPSRVR 192.168.10.5
SET FTPDIR "C:\Inetpub\ftproot\"
SET RESTORESTAT 1
## END OF FILE
you need a ftpserver to do it
you can change the 46xxsettings.txt file
then it can backup to the ftp server and your speeddails and calllogs are saved
all the settings on the phones are also saved
here an example of a 46xxsettings.txt file for ftp
## 4600 Site Specific `Settings
SET FTPUSERSTAT 1
SET L2Q 2
SET SYSLANG English
SET AGCHAND 0
SET AGCHEAD 0
SET AGCSPKR 0
SET OPSTAT 110
SET FTPSRVR 192.168.10.5
SET FTPDIR "C:\Inetpub\ftproot\"
SET RESTORESTAT 1
## END OF FILE
- Status
Similar threads
