I have 2 analog rotary bomb proof phones in my system which cannot dial. When trying to dial a 4 digit ext after the second digit it returns to dial tone. I can rec. calls on both. My first thought was COR or COS, but I can put a std touch pad phone on the frame and dial fine. Please help.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Rotary Phone Can't Dial
- Thread starter mx103
- Start date
mikeydidit
IS-IT--Management
Make sure you have Tip and ring correct to the phone/jack. The older phones were not reverse polarity guarded and they would not dial if reversed.
When is the last time you helped someone, just because you were able to?
For the best response to a question, read faq690-6594
When is the last time you helped someone, just because you were able to?
For the best response to a question, read faq690-6594
- Status
Similar threads
- Question