Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Rotary dialing from a Definity G3Si 1

Status
Not open for further replies.
kwoods

kwoods

MIS
Nov 14, 2003
13
US
Is there any way to make a rotary phone work on a Definity G3Si system? I have dialtone and it works if dialed to, but I can't dial out from the rotary.
 
Sort by date Sort by votes
Translate the station as a '500' type set (rotary/analog).

Kevin
 
Upvote 0 Downvote
Make sure that on the station the field "ignore rotary digits" is not set to "yes". This field should set to yes for all other stations to avoid static from causing dialing and transfering and such.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

A
  • Question
CMC Cabinet Connections for Definity G3
Replies
5
Views
230
dialtonebone
dialtonebone
A
  • Question
WTB: TN2311AP/TN2402 Processor Card for G3si R9 Lab (Hobbyist Preservation Project)
Replies
11
Views
921
JefferP
JefferP
Z
  • Locked
  • Question
Outbound dialing issue
Replies
3
Views
464
zameerjafri
Z
A
Looking for Avaya DEFINITY G3csi R6 Tech / Media / Guidance
Replies
4
Views
329
AncientEnterprise
A
ack41
  • Locked
  • Question
Definity ECS R9.5 program card
Replies
3
Views
507
AvayaTier3
AvayaTier3

Part and Inventory Search

Sponsor

Back
Top