Reset translations without effecting licensing onG3csi R6

[AncientEnterprise]

Hey all,

Thanks for all of your help so far with this project, I appreciate having access to this knowledge. I was wondering, is there a way for me to “reset” the config without losing any of the licensing in-place? I think there is an issue with the old translation but I want to wipe it like the system is new. Is this possible in R6? If not, I need a workaround for the card placements it’s expecting. I’ve tried a few resets cold I and II and I can run tests on all of the cards successfully. It also seems like the system is set to failover to cab B but this isn’t how I want to use it, I want to add integrations sometime like Audix or property management as well as play with legacy phones with neon MWI, adding trunks to the collectors network, etc.

Thanks for your help!

Marshal

Edit:grammar

 

[AvayaTier3]

You should contact someone for professional tech support. You have so much you are trying to accomplish on equipment over twenty five years old.

 

[AncientEnterprise]

You should contact someone for professional tech support. You have so much you are trying to accomplish on equipment over twenty five years old.

This is really a hobbyist project. I’m an IT pro with 15+ years in all sorts of things from MSPs to ISPs, telecom is an interest of mine. I acquired this system to learn how to do this stuff as much as I can on my own and document it for others. Many of these configuration techniques and manuals aren’t freely available and few people have documented their journeys through learning. I’m always looking for people with first-hand experience to help with this project!