Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ReQueue from m to h to m

Status
Not open for further replies.
learn2shoot

learn2shoot

IS-IT--Management
Joined
Jun 15, 2007
Messages
79
Location
US
I have an S8720 CM 4.2 and have a vector which queue a call to hunt 279 m then later to 279 h. It is possible depending on a number of variables for this call to be queued back to 279 m - does this call loose it's priority at this point?
 
Status
Not open for further replies.

Similar threads

jimbojimbo
  • Locked
  • Helpful tip Helpful tip
Upgrade the Avaya OS from 8.4 to 8.10
Replies
0
Views
306
jimbojimbo
jimbojimbo
ITHawkDriver
  • Locked
  • Question Question
Way to copy Translations from ESS to rebuilt primary
Replies
1
Views
448
nomek1
nomek1
Vivek2005
  • Locked
  • Question Question
Hello all, Did any did upgrade of Avaya Session manager from 8.1.3.9 to 10.2.1 upgrade?
Replies
8
Views
924
dialtonebone
dialtonebone
tthunder
  • Question Question
How to obtain concurrent inbound & outbound maximum
Replies
2
Views
146
dialtonebone
dialtonebone
jimha
  • Locked
  • Question Question
Distribute Call to multiple stations
Replies
5
Views
470
jimha
jimha

Part and Inventory Search

Sponsor

Back
Top