Remove REMOTECAB from active host list

[absinthium]

Hi all,

I have an issue on a CS1KS 4.5 with only 1 MG.
For some reason the REMOTECAB3 hostname keeps appearing in my host table and I would like to get rid of it!

How do I remove that record from the dbase?

=> prt host

Call Server/Main Cabinet
ID Hostname IP Address
1 CSNODE10ACT 172.16.86.10
2 PPPL 10.0.0.1
3 PPPR 10.0.0.2
4 CSNODE10SBY 172.16.86.20
Media Gateway/Expansion Cabinet # 1
ID Hostname IP Address
1 MG1 172.16.85.11
Media Gateway/Expansion Cabinet # 3
Host entry(ies) not found.
OK

=> stat host

*** Active Internet Host Table ***
ID Hostname IP Address
-- localhost 127.0.0.1
1 CSNODE10ACT 172.16.86.10
2 PPPL 10.0.0.1
3 PPPR 10.0.0.2
-- SECONDARY_ENET 137.135.128.254
-- REMOTECAB1 172.16.85.11
-- REMOTECAB3 10.0.3.2

=> prt ipr

port MAC address IP Address mask zero bw autoneg
----------------------------------------------------------------------
IPR 1 00:00:00:00:00:00 172.16.85.11 255.255.255.0 NO ON
IPR 2 00:00:00:00:00:00 10.0.2.2 255.255.255.0 NO ON
IPR 3 00:00:00:00:00:00 10.0.3.2 255.255.255.0 NO ON
IPR 4 00:00:00:00:00:00 10.0.4.2 255.255.255.0 NO ON

=>

Hence I also get this in LD 135

.stat ipl
Media Gateway/Expansion Cabinet 1 : LINK UP

Media Gateway/Expansion Cabinet 2 : UNEQ

Media Gateway/Expansion Cabinet 3 : LINK DOWN

Media Gateway/Expansion Cabinet 4 : UNEQ

Help!

 

[tnphoneman]

This appears because you have a dual expansion daughterboard. Nothing to worry about.

Signature===========================================
Artificial Intelligence Is No Match for Natural Stupidity.

The latest survey shows that 3 out of 4 people make up 75% of the population.

The original point and click interface was a Smith & Wesson.

Red meat is not bad for you, it is the green fuzzy meat that is bad.

 

[absinthium]

Ahhhhh D'uh!!!

Thanks mate. I have no experience with the SSC systems. That makes perfect sense, 1/3 and 2/4, however makes no sense!!

 

[tnphoneman]

Original daughterboards were single port one on the top and 2 on the bottom. Then they came out with the dual port boards. No need to reconfigure what was already installed just add to it.

Think back to the old 8 port analog cards when they came out with the 1st 16 port card 0,8,1,9 etc.... stupid but worked.

Signature===========================================
Artificial Intelligence Is No Match for Natural Stupidity.

The latest survey shows that 3 out of 4 people make up 75% of the population.

The original point and click interface was a Smith & Wesson.

Red meat is not bad for you, it is the green fuzzy meat that is bad.