Hello!
I am in desperate need of connecting remotely to our switch (G3v4). I live over an hour from work and get called constantly to make "Emergency" changes to our call routing.
We use Teranova or DSA via nokia mobiles using IR to the Laptops and this works well. It can be quite querky to get working but either DSA or Teranova should do it on most machines. Hope this helps
John
How do I find the inads ext? I ran list ext and found nothing. Is there a default station name it would be setup with? I see a ton of NETCON ext's but these do nothing when dialed.
I assume I can use Procom Plus, right?
Thanks, S.R.
When all fails time to get dirty. Most of the time the system will be set up with a pots line. this would not be in the switch. Some times (if your lucky) you might find it in the bulletin page. Back to getting dirty, on the back of the switch look for the modem coming into the switch and work backwards to the mpop to find the number. Look!!! New Buttons
Same amount of time!
hi
Easy way to find the inads ext is your connect to the pair 25 of AUX terminal (by test phone with "crocodiles" or any telephone set) and call to the station with display - you will see the number of modem ext.
Very you never know...someone could read this and add it to there bulletin board. Next thing you know your the new admin, with the INADS number Look!!! New Buttons
Same amount of time!
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.