Re:Programming a New PRI T1

[jaclarke]

Hey, I'm new to programming PRI T1's on my Nortel Meridian system. I was wondering if anyone had a cheat sheet or anything that I can use to go about programming this new PRI t1 that telco just bought in for me, as well as I need to get the 50 additional DID's that I have requested that telco said are now coming in on this new PRI T1?

>ld 60
DTI000
.stat 4

PRI* TRK LOOP 4 - ENBL
FFMT/LCMT/YALMT: ESF/B8Z/FDL
SERVICE RESTORE: YES
YEL ALM PROCESS: YES
ALARM STATUS : RED
CH 01 - DSBL TIE 3VCE CH 02 - DSBL TIE 3VCE
CH 03 - DSBL TIE 3VCE CH 04 - DSBL TIE 3VCE
CH 05 - DSBL TIE 3VCE CH 06 - DSBL TIE 3VCE
CH 07 - DSBL TIE 3VCE CH 08 - DSBL TIE 3VCE
CH 09 - DSBL TIE 3VCE CH 10 - DSBL TIE 3VCE
CH 11 - DSBL TIE 3VCE CH 12 - DSBL TIE 3VCE
CH 13 - DSBL TIE 3VCE CH 14 - DSBL TIE 3VCE
CH 15 - DSBL TIE 3VCE CH 16 - DSBL TIE 3VCE
CH 17 - DSBL TIE 3VCE CH 18 - DSBL TIE 3VCE
CH 19 - DSBL TIE 3VCE CH 20 - DSBL TIE 3VCE
CH 21 - DSBL TIE 3VCE CH 22 - DSBL TIE 3VCE
CH 23 - DSBL TIE 3VCE CH 24 - DSBL TIE 3VCE
.
E 007 00 9377 A030007 03/10 12:09 00:06:26
& 0000 0000

 

[phonz1]

is this loop 4 your new loop?

in LD20, prt a tn and post. also post your route!

 

[jaclarke]

Here is a prt out of my TN, how would I find out my route?


REQ: prt
TYPE: dnb
SCH0099 DNB?
TYPE: dnb
CUST 0
DN 9363
DATE
PAGE
DES

DN 9363
CPND
CPND_LANG ROMAN
NAME JAMES CLARKE
XPLN 13
DISPLAY_FMT FIRST,LAST
TYPE SL1
TN 032 0 00 04 KEY 00 H MARP DES UBS 3 MAR 2008
(2616)
TN 032 0 00 04 KEY 01 DES UBS 3 MAR 2008
(2616)


NACT
REQ: prt
TYPE: tnb
TN 32 4
DATE
PAGE
DES

DES UBS
TN 032 0 00 04
TYPE 2616
CDEN 8D
CUST 0
AOM 0
FDN 7000
TGAR 1
LDN NO
NCOS 5
SGRP 0
RNPG 8
SCI 0
SSU
LNRS 16
XLST
SFLT NO
CAC_MFC 0
CLS TLD FBD WTA LPR PUA MTD FNA HTA ADD HFA
MWA LMPN RMMD SMWD AAD IMD XHD IRD NID OLD VCE DRG1
POD DSX VMD CMSD SLKD CCSD SWD LNA CNDA
CFTD SFD MRD DDV CNID CDCA MSID DAPA BFED RCBD
ICDD CDMD LLCN MCTD CLBD AUTU
GPUA DPUA DNDD CFXD ARHD CLTD ASCD
CPFA CPTA ABDD DELD CFHD FICD NAID BUZZ AGRD MOAD
UDI RCC HBTD AHD IPND DDGA NAMA MIND PRSD NRWD NRCD NROD
DRDD EXR0
USMD USRD ULAD CCBD RTDD RBDD RBHD PGND OCBD FLXD FTTC DNDY DNO3 MCBN
FDSD NOVD CDMR
CPND_LANG ENG
RCO 0
HUNT 7000
LHK 0
PLEV 02
CSDN
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
DNDR 0
KEY 00 MCR 9363 0 MARP
CPND
CPND_LANG ROMAN
NAME JAMES CLARKE
XPLN 13
DISPLAY_FMT FIRST,LAST
01 MCR 9363 0
CPND
CPND_LANG ROMAN
NAME JAMES CLARKE
XPLN 13
DISPLAY_FMT FIRST,LAST
02 MCR 9999 0
CPND
CPND_LANG ROMAN
NAME IT HELPDESK
XPLN 11
DISPLAY_FMT FIRST,LAST
03 RGA
04 AO6
05 TRN
06 RNP
07
08 CFW 4 9326
09
10
11 ADL 16
12 ADL 16
13 ADL 16
14 MWK 7000
15
DATE 3 MAR 2008


NACT

 

[phonz1]

no, I need a tn of one of your trunks..

 

[jaclarke]

What will that command be to prt out the trunk in LD 20?

 

[bigindian65]

prt
tnb
4 1

prt rdb in ld 21

do a ltm at thr req: promt to prt your route members.

Mato' Was'aka

 

[hawks]

Take look at this site and look at
"ISDN PRI Installation 553-2901-201"

http://www.pbxtechsupport.com/manuals/m125_4x.htm

 

[jaclarke]

Here you go!
TYPE TNB
TN **

REQ: prt
TYPE: tnb
TN 4 1
DATE
PAGE
DES

DES NT1_NA1_LP1
TN 004 01
TYPE TIE
CUST 0
TRK DTI
PDCA 1
PCML MU
NCOS 7
RTMB 20 1
A/B BIT SIGNALING
TGAR 1
SIGL EM4
STRI/STRO IMM IMM
SUPN YES
AST NO
IAPG 0
CLS TLD DTN ECD WTA LPR APN THFD XREP HKD
P10 VNL MID
TKID
AACR NO
DATE NO DATE


NACT

TN 007 21 MBER 21 FAX PRI
TN 007 22 MBER 22 FAX PRI
TN 007 23 MBER 23 FAX PRI
TN 008 01 MBER 25 DTCI 1-3
TN 008 02 MBER 26 DTCI 1-3
TN 008 03 MBER 27 DTCI 1-3
TN 008 04 MBER 28 DTCI 1-3
TN 008 05 MBER 29 DTCI 1-3
TN 008 06 MBER 30 DTCI 1-3
TN 008 07 MBER 31 DTCI 1-3
TN 008 08 MBER 32 DTCI 1-3
TN 008 09 MBER 33 DTCI 1-3


PAGE 003

TN 008 10 MBER 34 DTCI 1-3
TN 008 11 MBER 35 DTCI 1-3
TN 008 12 MBER 36 DTCI 1-3
TN 008 13 MBER 37 DTCI 1-3
TN 008 14 MBER 38 DTCI 1-3
TN 008 15 MBER 39 DTCI 1-3
TN 008 16 MBER 40 DTCI 1-3
TN 008 17 MBER 41 DTCI 1-3
TN 008 18 MBER 42 DTCI 1-3
TN 008 19 MBER 43 DTCI 1-3
TN 008 20 MBER 44 DTCI 1-3
TN 008 21 MBER 45 DTCI 1-3
TN 008 22 MBER 46 DTCI 1-3
TN 008 23 MBER 47 DTCI 1-3

TYPE TLST
TKTP COT
ROUT 12
DES 1300
TN 016 0 00 07 MBER 1 1300

TYPE TLST
TKTP TIE
ROUT 20
DES WDRNET
TN 004 01 MBER 1 NT1_NA1_LP1
TN 004 02 MBER 2 NT1_NA1_LP1
TN 004 03 MBER 3 NT1_NA1_LP1
TN 004 04 MBER 4 NT1_NA1_LP1
TN 004 05 MBER 5 NT1_NA1_LP1
TN 004 06 MBER 6 NT1_NA1_LP1
TN 004 07 MBER 7 NT1_NA1_LP1
TN 004 08 MBER 8 NT1_NA1_LP1
TN 004 09 MBER 9 NT1_NA1_LP1
TN 004 10 MBER 10 NT1_NA1_LP1
TN 004 11 MBER 11 NT1_NA1_LP1
TN 004 12 MBER 12 NT1_NA1_LP1
TN 004 13 MBER 13 NT1_NA1_LP1
TN 004 14 MBER 14 NT1_NA1_LP1
TN 004 15 MBER 15 NT1_NA1_LP1
TN 004 16 MBER 16 NT1_NA1_LP1
TN 004 17 MBER 17 NT1_NA1_LP1
TN 004 18 MBER 18 NT1_NA1_LP1
TN 004 19 MBER 19 NT1_NA1_LP1
TN 004 20 MBER 20 NT1_NA1_LP1
TN 004 21 MBER 21 NT1_NA1_LP1
TN 004 22 MBER 22 NT1_NA1_LP1
TN 004 23 MBER 23 NT1_NA1_LP1
TN 004 24 MBER 24 NT1_NA1_LP1

TYPE TLST
TKTP TIE
ROUT 21
DES RIGHTFAX
TN 006 01 MBER 1 FAX TIE
TN 006 02 MBER 2 FAX TIE
TN 006 03 MBER 3 FAX TIE
TN 006 04 MBER 4 FAX TIE
TN 006 05 MBER 5 FAX TIE
TN 006 06 MBER 6 FAX TIE
TN 006 07 MBER 7 FAX TIE
TN 006 08 MBER 8 FAX TIE
TN 006 09 MBER 9 FAX TIE
TN 006 10 MBER 10 FAX TIE
TN 006 11 MBER 11 FAX TIE


PAGE 004

TN 006 12 MBER 12 FAX TIE
TN 006 13 MBER 13 FAX TIE
TN 006 14 MBER 14 FAX TIE
TN 006 15 MBER 15 FAX TIE
TN 006 16 MBER 16 FAX TIE

TYPE TLST
TKTP TIE
ROUT 22
DES TURRET PBX
TN 009 01 MBER 1 TURRET
TN 009 02 MBER 2 TURRET
TN 009 03 MBER 3 TURRET
TN 009 04 MBER 4 TURRET PBX
TN 009 05 MBER 5 TURRET
TN 009 06 MBER 6 TURRET
TN 009 07 MBER 7 TURRET
TN 009 08 MBER 8 TURRET
TN 009 09 MBER 9 TURRET
TN 009 10 MBER 10 TURRET
TN 009 11 MBER 11 TURRET
TN 009 12 MBER 12 TURRET
TN 009 13 MBER 13 TURRET
TN 009 14 MBER 14 TURRET
TN 009 15 MBER 15 TURRET
TN 009 16 MBER 16 TURRET
TN 009 17 MBER 17 TURRET
TN 009 18 MBER 18 TURRET
TN 009 19 MBER 19 TURRET
TN 009 20 MBER 20 TURRET
TN 009 21 MBER 21 TURRET
TN 009 22 MBER 22 TURRET
TN 009 23 MBER 23 TURRET
TN 009 24 MBER 24 TURRET
TN 009 25 MBER 25 TURRET PBX
TN 009 26 MBER 26 TURRET
TN 009 27 MBER 27 TURRET
TN 009 28 MBER 28 TURRET
TN 009 29 MBER 29 TURRET
TN 009 30 MBER 30 TURRET

TYPE TLST
TKTP TIE
ROUT 30
DES BH1_QSIG_VOIP
TN 005 01 MBER 1 L005_CV1_SM1
TN 005 02 MBER 2 L005_CV1_SM1
TN 005 03 MBER 3 L005_CV1_SM1
TN 005 04 MBER 4 L005_CV1_SM1
TN 005 05 MBER 5 L005_CV1_SM1
TN 005 06 MBER 6 L005_CV1_SM1
TN 005 07 MBER 7 L005_CV1_SM1
TN 005 08 MBER 8 L005_CV1_SM1
TN 005 09 MBER 9 L005_CV1_SM1
TN 005 10 MBER 10 L005_CV1_SM1
TN 005 11 MBER 11 L005_CV1_SM1
TN 005 12 MBER 12 L005_CV1_SM1
TN 005 13 MBER 13 L005_CV1_SM1
TN 005 14 MBER 14 L005_CV1_SM1
TN 005 15 MBER 15 L005_CV1_SM1
TN 005 16 MBER 16 L005_CV1_SM1
TN 005 17 MBER 17 L005_CV1_SM1
TN 005 18 MBER 18 L005_CV1_SM1
TN 005 19 MBER 19 L005_CV1_SM1


PAGE 005

TN 005 20 MBER 20 L005_CV1_SM1
TN 005 21 MBER 21 L005_CV1_SM1
TN 005 22 MBER 22 L005_CV1_SM1
TN 005 23 MBER 23 L005_CV1_SM1
TN 005 24 MBER 24 L005_CV1_SM1
TN 005 25 MBER 25 L005_CV1_SM1
TN 005 26 MBER 26 L005_CV1_SM1
TN 005 27 MBER 27 L005_CV1_SM1
TN 005 28 MBER 28 L005_CV1_SM1
TN 005 29 MBER 29 L005_CV1_SM1
TN 005 30 MBER 30 L005_CV1_SM1

TYPE TLST
TKTP MUS
ROUT 40
DES

TYPE TLST
TKTP AWR
ROUT 41
DES

TYPE TLST
TKTP RAN
ROUT 42
DES

TYPE TLST
TKTP RAN
ROUT 43
DES

TYPE TLST
TKTP PAG
ROUT 44
DES

TYPE TLST
TKTP COT
ROUT 48
DES IPC 1800

TYPE TLST
TKTP COT
ROUT 49
DES IPC 1800

TYPE TLST
TKTP FEX
ROUT 50
DES

TYPE TLST
TKTP FEX
ROUT 51
DES

TYPE TLST
TKTP FEX
ROUT 52
DES

TYPE TLST
TKTP TIE
ROUT 100
DES TES


REQ:
N 088 00 A030004 4337 03/10 13:24 00:00:12
& 0000 0000

 

[phonz1]

ok, loop4 is in route 20, do you have the circuit cabled into the switch? and what type of switch is it??

 

[jaclarke]

No the ckt is not cabled into the switch as yet, and the version is as follows;
ld 22
PT2000
MARP NOT ACTIVATED


REQ iss

CALL SERVER/MAIN CAB
VERSION 2121
RELEASE 4
ISSUE 50 W
IDLE_SET_DISPLAY NORTEL

 

[phonz1]

ok, you are in Red Alarm, you need to cable the switch to the circuit. Then, disl 4 and enll 4 and it should come up if the Telco has anything on it. The DID's are another story, what the gave you for a range is dependant upon what is already being used in your switch, in LD20, PRT an LUDN and post, but get the circuit cabled up first

 

[jjinkins]

It doesn't appear to be programmed as a PRI. The route is built as a DTI. You may want to check with the CO to make sure what it actually is.