Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Lost E1 PRI link

Status
Not open for further replies.

telepath

IS-IT--Management
Mar 26, 2003
86
0
0
MX
This is an ageing CS1000M v7.6 After a power failure and reboot, it lost connection to 2 sites both in the same Dual PRI card. After some reseting of one of the loops it recovered, but the other refuses to link. The "remote" system is 15 feet away connected with a factory issue db15-BNC cable.
Besides resetting it (LD96/LD60). Would You advce to let the clock FRUN? ¿would it affect the other working PRIs?
 
The chances are that the link has become disabled.

Start by checking the DCH in LD 96. Also the MSDL may need resetting.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website = linkedin
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top