Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Re-locating a CAP Module
- Thread starter Uraby
- Start date
Move the CAP over to the other phone. Check out the wiring where it is currently located. Duplicate it at the other phone. The power supply will need to be moved with it.
Programming
1. Have the CAP module attached to the telephone with power supplied.
2. Enter SYSTEM PROGRAMMING
3. Select SHOW and then select NEXT to CAP ASSIGNMENT
4. Select SHOW
5. Cap1: none is displayed, select CHANGE
6. Cap1: xxx, enter the extension number of the CAP with one or two KLMs
attached. MRoberts
mroberts@americaii.com
If you find a tip helpful, please mark it as such.
Programming
1. Have the CAP module attached to the telephone with power supplied.
2. Enter SYSTEM PROGRAMMING
3. Select SHOW and then select NEXT to CAP ASSIGNMENT
4. Select SHOW
5. Cap1: none is displayed, select CHANGE
6. Cap1: xxx, enter the extension number of the CAP with one or two KLMs
attached. MRoberts
mroberts@americaii.com
If you find a tip helpful, please mark it as such.
In case you need it:WIRING:
The Norstar KLM needs an external power source. A way of providing this source is by wiring in the VP324 24-volt DC power supply. In this example a 6 conductor modular jack is being used. The power supply can power 2 KLMs. To connect second KLM you will add another power pair to the 3rd pair on the 6 conductor modular jack. You can have a maximum of 5 CAPs(10 KLMs) “central answering positions” per system. The CAP can only be a 7324 and you can attach 2 KLMs to the 7324.
1st KLM Power Pair
pin 5 Yellow -24 V
pin 2 Black Gnd
2nd KLM Power Pair
Pin 6 Blue -24 V
Pin 1 White Gnd
MRoberts
mroberts@americaii.com
If you find a tip helpful, please mark it as such.
The Norstar KLM needs an external power source. A way of providing this source is by wiring in the VP324 24-volt DC power supply. In this example a 6 conductor modular jack is being used. The power supply can power 2 KLMs. To connect second KLM you will add another power pair to the 3rd pair on the 6 conductor modular jack. You can have a maximum of 5 CAPs(10 KLMs) “central answering positions” per system. The CAP can only be a 7324 and you can attach 2 KLMs to the 7324.
1st KLM Power Pair
pin 5 Yellow -24 V
pin 2 Black Gnd
2nd KLM Power Pair
Pin 6 Blue -24 V
Pin 1 White Gnd
MRoberts
mroberts@americaii.com
If you find a tip helpful, please mark it as such.
In case you need it:WIRING:
The Norstar CAP needs an external power source. A way of providing this source is by wiring in the VP324 24-volt DC power supply. In this example a 6 conductor modular jack is being used. The power supply can power 2 CAPs. To connect second CAP you will add another power pair to the 3rd pair on the 6 conductor modular jack. You can have a maximum of 5 CAPs(10 KLMs) “central answering positions” per system. The CAP can only be a 7324 and you can attach 2 CAPs to the 7324.
1st CAP Power Pair
pin 5 Yellow -24 V
pin 2 Black Gnd
2nd CAP Power Pair
Pin 6 Blue -24 V
Pin 1 White Gnd
MRoberts
mroberts@americaii.com
If you find a tip helpful, please mark it as such.
The Norstar CAP needs an external power source. A way of providing this source is by wiring in the VP324 24-volt DC power supply. In this example a 6 conductor modular jack is being used. The power supply can power 2 CAPs. To connect second CAP you will add another power pair to the 3rd pair on the 6 conductor modular jack. You can have a maximum of 5 CAPs(10 KLMs) “central answering positions” per system. The CAP can only be a 7324 and you can attach 2 CAPs to the 7324.
1st CAP Power Pair
pin 5 Yellow -24 V
pin 2 Black Gnd
2nd CAP Power Pair
Pin 6 Blue -24 V
Pin 1 White Gnd
MRoberts
mroberts@americaii.com
If you find a tip helpful, please mark it as such.
- Status
Similar threads
