Quiero configurar mi auth codes por horarios 4

[usuariodenortel]

Hola, soy nuevo en este foro, me acabo de incluir y espero poder participar tambien resolviendo algunas dudas.
Pero resulta que yo tengo una duda por el momento:
Estoy configurando mi SAR para poder restringir por horarios a los usuarios de mi opcion 61, pero cuando los usuarios tienen codigos de autorizacion, me brincan mis restricciones de horarios.
Existe alguna forma para bloquear tambien por horarios a los codigos de autorizacion???
Gracias.

 

[openthegate]

For those that dont read spanish, this is his question


Hi, I'm new to this forum, I just hope I can include and involve resolving some doubts.
But it turns out that I have a question for the moment:
SAR'm setting my schedule to be able to restrict users from my 61, but when users have authorization codes, I jump my curfew.
There is also a way to block schedules for the authorization codes?
Thank you.

 

[bigindian65]

He can restrict on the route with TOD is one way to go

Mato' Was'aka

 

[NortelGuy1979]

Buenos Dias,

No hay manera de que Scheduled Access Restrictions ignore los codigos de autorizacion. Los codigos de autorizacion CLS, TGAR, NCOS siempre tendran precedencia.

Los codigos de autorizacion no estan sujetos a Restricciones Planificadas de Acceso (Scheduled Access Restrictions) y siempre tendran el mismo CLS, TGAR, y CLS.

Si se desea apagar una entera ruta troncal por un periodo de tiempo, se puede utilizar los horarios "Time Of Day" en el RLI, como lo sugirio "bigindian65" anteriormente.

Haganos saber si necesita ayuda con esa programacion o mas informacion, gusto en ayudar!

Saludos,
Mateo

Matthew - Technical Support Engineer

 

[NortelGuy1979]

The OP's question, in English, would best be stated:

=======================
Hello,
I am new to this forum. I just joined and hope to participate in answering questions as well. But as it turns out, I am the one with the question at this moment.

I'm trying to configurate my SAR to restrict users in my option 61 per scheduled times , but when the users have an authorization code, they override my schedule restrictions.

Is there a way to also block by schedule all those with authorization codes?

Thanks!
=======================

If anyone has any suggestions besides what bigindian65 and I suggested (using TOD on the RLI instead of SAR), you can post and I'll translate.

~Matthew

Matthew - Technical Support Engineer

 

[usuariodenortel]

Saludos amigos, gracias por sus comentarios y aportaciones, pero no he podido resolver mi problema.
Aunque me sugieren que puedo bloquear troncales por horarios, realmente no esto lo que deseo, ya que del 100% de mis extensiones solo un porcentaje deseo limitar por horario y el resto del porcentaje deseo dejarlos siempre sin limitaciones.
Ejemplo:
65% de mis extensiones durante las 24hrs del día, los 365 días del año siempre tendrán los mismos privilegios.
35% de mis extensiones tienen codigos de autorizacion los cuales funcionaran normalmente de 0800 a 1600 hrs, siendo a las 1601 hasta las 0759 hrs del siguiente día donde deseo que dichos códigos de autorización sean restringidos a servicio local unicamente.
Si alguien ha hecho esto alguna vez, le agradecería mucho su aportación y compartición de conocimientos.
Gracias.

 

[NortelGuy1979]

All,

In short, for (example) 65% of his phones, they should always have the same privileges. For 35% of hsi phones, they should have privileges from 8a-4p, and outside of 8a-5p they should be restricted to local service only. (I'll translate better in a minute, but that's the gist).

I can't think of any real answers as if he uses auth codes, auth codes always work, no time restrictions?

~M~

Matthew - Technical Support Engineer

 

[NortelGuy1979]

En inglés:

Greetings my friends, thatnks for your comments and contributions, but I have not been able to solve my problem.
Although you have suggested that I can block trunks by schedule, in reality that is not what I would like, since of 100% of my extensions I only need to limit by schedule a percentage of them. The rest of the percentage I would like to let them be with no limitations.

Example:
65% of my extensions 24 hrs. a day, 365 days of the year they will have the same privileges
35% of my extensions have an authorization code which will be normally working between 0800 and 1600 hrs, with 1601 to 0759 of the following day when I would like such authorization codes to be restricted to only local service

If someone has done this one, I would appreciate the contrubution and knowledge sharing.



Matthew - Technical Support Engineer

 

[NortelGuy1979]

(Español)
Saludos,

No conozco alguna manera de restringir codigos de autorizacion por hora del dia. Los codigos de autorizacion siempre deshabilitan CLS, NCOS, and TGAR.

Si 35% de los telefonos no pueden tener codigos de autorizacion, entonces podrias utilizar un simple Restriccion de Acesso por Horario en el telefono y no otorgarles a los usuarios Codigos de Autorizacion. Entonces podrias definir los horarios 1601 a 2359 y 0000 a 0759 para ser restringidos para servicio local solamente.

Continuare investigando para ver si hay alguna otra manera de resolver tu problema.

~Mateo

(English):
Hello,

I do not know of any way to have Authorization Codes restricted by Time of Day. Authorization codes always override the CLS, NCOS, and TGAR.

If the 35% phones could not have authorization codes, then you could use a simple Scheduled Access Restriction on the phone and not give the users Authorization Codes. Then you could set the hours 1601 to 2359 and 0000 to 0759 to be restricted to local service only.

I will keep researching and see if I can find any other manner to solve your problem.

-Matthew

Anyone else have any ideas?

Matthew - Technical Support Engineer

 

[bigindian65]

what PBX type and release is he on? If it's in there I missed it

Mato' Was'aka

 

[NortelGuy1979]

All he said was Opt 61C, but no release info.

Matthew - Technical Support Engineer

 

[NortelGuy1979]

UsariodeNortel:

¿Qué revisión del programa tiene?

~M~


Matthew - Technical Support Engineer

 

[usuariodenortel]

Hola amigos, muchas gracias por sus respuestas y ayuda.
Mi opcion 61 tiene un release 3. Gracias.