Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Program carrier access codes
- Thread starter eartel
- Start date
Probably in ARS.
Lets say for example you wanted the 2000 code to be sent for calls, long distance, to a 480 area code.
Your ARS table would have 1480N; for the code, 1480NY2000 for the the telephone number, Dial or Dial 3k1, and your outgoing group ID.
The 1480N; matches well...1480 (area code match for long distance), the 1480N sends 1480XXXXXXX, the Y says "wait for a connected/progress tone" and then 2000 gets sent. It should work. We have something like that setup for a customer for automatic calling card dialing codes.
That should get you started.
-Austin
ACE: Implement IP Office
Lets say for example you wanted the 2000 code to be sent for calls, long distance, to a 480 area code.
Your ARS table would have 1480N; for the code, 1480NY2000 for the the telephone number, Dial or Dial 3k1, and your outgoing group ID.
The 1480N; matches well...1480 (area code match for long distance), the 1480N sends 1480XXXXXXX, the Y says "wait for a connected/progress tone" and then 2000 gets sent. It should work. We have something like that setup for a customer for automatic calling card dialing codes.
That should get you started.
-Austin
ACE: Implement IP Office
- Status
Similar threads
