Problem Upgrading to 4.0.7

[stuzzy]

I am trying to upgrade from 4.0.5 but all of my modules are showing up red in the upgrade wizard and it fails every time.

406V2, 3 DCP30's, 1DCP16, 1 ATM16, 1 POTS8 and all are at 4.0.5

The ATM16 was never upgraded to the maint binaries.

I've read through bulletin 84 and I'm stumped. Any ideas? Am I missing something?

 

[jamie77]

Password correct. (default password)

Static IP????

Firewall??

Jamie Green

ACA:Implement - IP Office
ACS:Implement - IP Office

http://www.alliedcom.co.uk

Fooball is not a matter of life and death-It is far more important!!!!

 

[stuzzy]

The password is correct (default - Administrator)

The machiine I am using to upgrade the IP Office has VMPro running on it as well so it has a static IP and is directly connected to the switch.

no firewall.

 

[olbs]

Isn't password the default password for upgrading/Monitor/Callstatus?

In any case go into the security settings for that system and reset the password for upgrading since it's different from the config password.

 

[ronromano]

you have ds30's, that means you need to have a 406u.bin copied into the 3.2.999 or the ds30s will never upgrade. Copy the file to there and try again

 

[jamie77]

It's not the Administrator password you need. That is the Password for the Administrator Service User.

The default system password is password.

ronromano: I don't think that is an issue with 4.0.7. I upgraded mine from 4.0.5>4.0.7 without the IP406.bin in the same folder as the DS30 bin file

Jamie Green

ACA:Implement - IP Office
ACS:Implement - IP Office

http://www.alliedcom.co.uk

Fooball is not a matter of life and death-It is far more important!!!!

 

[ProviderReborn]

What is your DTE port kicking out in regards to this. Or the TFTP log? Are you getting failed to send errors?

 

[ronromano]

Jamie, I didn't take the time to look. If you went from 4.0.5 to 4.0.7 you might have had the 406u in from before. Maybe this isn't an issue anymore. Who knows.

 

[PlatinumGuy]

The 406 bin file in the 999 directory has been rectumfied.

I can confirm.

ACA - IP Office Implement
ACS - IP Office Implement
ACE - IP Office Implement
ACI - IP Office Implement

 

[stuzzy]

Thanks guys. I was using the wrong default password. I feel pretty stupid. I haven't had a lot of spare time to delve into 4.0 and I didn't know there was a separate password to upgrade and monitor. Doh!

 

[tlpeter]

then it is about time you start reading the techtips that come with the software
there is a lot of important information oyu need to know when you upgrade


ACA - Implement IP Office
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!