DisasterMaster
Technical User
what's the difference between a cs1000 PRI v.s. Tie line loop?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
PRI v.s. Tie line
- Thread starter DisasterMaster
- Start date
- Status
That depends on what your talking about if it's a tie line with a DCH there is no difference. If your talking about tie lines without there is a big difference, the digits are sent over the Xmit side to the other end. Pri sends the info over the DCH
OLD ROLMEN WORKING ON NORTELS AND AVAYA
OLD ROLMEN WORKING ON NORTELS AND AVAYA
- Thread starter
- #4
DisasterMaster
Technical User
Good Answers! What are the advantages of one v.s. the other?
PRI has 23B (for voice) channels and 1D (for signaling) channel on a single PRI. This allows you to pass CLID.
A T1 uses all 24 channels for voice and does not pass CLID
A Tie line can be either, Basically a Tie line is a point to point connection.
A T1 uses all 24 channels for voice and does not pass CLID
A Tie line can be either, Basically a Tie line is a point to point connection.
- Status
Similar threads
