phoneguy73
Technical User
I have an existing PRI tie line to another system. The other system added a new extension now I can't call the new extension from the Nortel. Where do I find where to program in the nortel for the new extension?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
PRI TIE LINE PROGRMMING 1
- Thread starter phoneguy73
- Start date
- Status
-
1
- #4
To print them see below
ld 87
ESN000
MEM AVAIL: (U/P): 98645167 USED U P: 4858938 148244 TOT: 103652349
DISK SPACE NEEDED: 132 KBYTES
REQ prt
CUST 0
FEAT cdp
TYPE dsc
DSC
DSC XXXX This would be your extension entry
FLEN 0
DSP LSC
RLI 4 This could be different
NPA
NXX
To add one do this
REQ new
CUST 0
FEAT cdp
TYPE dsc
DSC XXXX This would be your new ext #
FLEN
DSP
RLI 4 This could be different
NPA
NXX
DSC
ld 87
ESN000
MEM AVAIL: (U/P): 98645167 USED U P: 4858938 148244 TOT: 103652349
DISK SPACE NEEDED: 132 KBYTES
REQ prt
CUST 0
FEAT cdp
TYPE dsc
DSC
DSC XXXX This would be your extension entry
FLEN 0
DSP LSC
RLI 4 This could be different
NPA
NXX
To add one do this
REQ new
CUST 0
FEAT cdp
TYPE dsc
DSC XXXX This would be your new ext #
FLEN
DSP
RLI 4 This could be different
NPA
NXX
DSC
- Status
Similar threads
