oldestgeek
Technical User
I need to connect two sites with a point to point circuit and use half the channels for voice and half for data. Will I need a csu/dsu plus a router to accomplish this or is there one box that can do both?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Point to point with add/drop
- Thread starter oldestgeek
- Start date
- Status
There are lots of ways you can do this.
One way is to use an Add/drop CSU/DSU, such as the Adtran 120, which as a V.35 interface (for data, to attach to a router) plus a DSX-1 port (for your voice channels; provides a T1 signal to your switch).
I believe (with the correct port licensing) that the Nortel SR 1002 router can also work as an Add/drop mux (making it a one-box solution).
One way is to use an Add/drop CSU/DSU, such as the Adtran 120, which as a V.35 interface (for data, to attach to a router) plus a DSX-1 port (for your voice channels; provides a T1 signal to your switch).
I believe (with the correct port licensing) that the Nortel SR 1002 router can also work as an Add/drop mux (making it a one-box solution).
- Thread starter
- #3
oldestgeek
Technical User
The 3200 Netvanta did exactly what I needed and was super-easy to configure. Thanks to all.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question