Yes, I have a used phone I haven't been using for about 6 months. I want to place it back in service. The phone was assigned to port 101 on my block extension 26. I now need it to be on port 105 extension 30, I have done this before but for the life of me can't remember how to change the port and extension. I think I can remember how to change the extension but the port has got me stumped. Can anyone help? Thanks!!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Placing a used phone back in service.
- Thread starter kcakids
- Start date
- Thread starter
- #3
Yes, thanks for the quick reply. I now what you saying under maintenance "Port/DN" and when I am in there I see port 105>26 I want to change that from 26 to 30. I would rather not get in to changing the block. Can you help me just a little bit more and point me in the right direction. Thanks again!!!
- Thread starter
- #6
- Status
Similar threads
