Phone over VPN No Display 1

[big70]

Having a VPN tunnel and have a 406V2 3.2(54) at main side and some 4610sw at other side.

Phones register and can make calls, but the diplay will not come up.

Having a tunnel setup with at one side Cisco ASA5510 and other side Cisco Pix 515

Is there some settings i must check in the PIX?

Greets Peter

 

[tlpeter]

yep that is the pix
i once made a vpn from the office to my home and used two d-link vpn routers for this
no problems at all
but they are for sure not as good as the cisco's

 

[NuggiFirst]

Disable "H323 fixup" in the Pix, and maybe the ASA

That's it!

 

[big70]

Found out that the phone is registerd as a 4624 and this is why i don,t have display.

Just can findout how to let it see the right phone type an 4610sw.

Greets Peter

 

[NuggiFirst]

Have you disabled "H323 fixup" ??
If not, then i bet that's why the phone is registered wrong!

 

[big70]

I did that it,s still the same, but thanks for the help.

Just going to look at the log,s maby something is blocked.

Greets Peter

 

[big70]

Fhanks for the help, wath did it was

no fixup protocol h323 h225 1720
no fixup protocol h323 ras 1718-1719


Greets Peter