Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gmmastros on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Panasonic KX-TDA50 How to add Loud Bells to (2) Extentions...

Status
Not open for further replies.

rob4jet

ISP
Jul 16, 2010
1
US
Panasonic KX-TDA50

How to add Loud Bells to (2) Extentions...

One of my customers has a Car Wash and needs to be able to hear (2) of the newly installed phones ring in high noise locations.

I'd thought if I simply added WHEELOCK LOUD BELLS at both telephone locations and simply plugged them into the PHONE EXTENTION jack under the phone, that it would work, but I'm told those jacks are for an additional DIGITAL phone extention. :(

By the way, I wired BOTH pairs from KSU to phone set. Figuring the outside pair (black/yellow) would be for Digital phone and the inside pair (green/red) would work the bell. I'm probably assuming this KSU works like the Panasonic XDP, but guess not. LOL

Thanks for the read and any help you may give me. Ran out of $$$$ and would like to complete this job this afternoon, so I have $$$$ for the weekend. heheheh

My cell: 949 677 4767 if needed.
Thanks, Rob the Phone Guy
 
unless you have wired the 2 ext's to a one of the 4 onboard DHLC ext's and turned on xdp paralled slt phone /bell/strob will not work....
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top