PAGING on Norstar Key System options

[sienz]

Can someone help me how to program a button, for paging through set/speaker/both in Norstar key system?

Our receptionist has one button that she use to page and this button set to page using speaker. I would like to change it through sets and probably would like to know so we can change it back to Speaker.
We just have one zone.

I know that we have to do something like: feature 61/62 and press the “page” button.

Please help.
Thank you

 

[RYLSFAN]

Feature * 3
touch the button you want to be page
Enter Feature 631

try that

Thats not my fastball, thats my hurry up and get by you pitch... Satchel Paige

 

[sienz]

RYLSFAN,

When the vendor show me how to set the button last time.
I am pretty sure it has something to do with Feature 61/62.

Something like 61 is for sets and 62 is for speaker. I just do not remeber at all

 

[RYLSFAN]

Feature * 3 - tells the system you want to set a feature to a button

Touching button- allows you to choose the button you wish

Feature 631- is the page code. You are correct, you can use 60,61,62 or 631. Try those, with the first two steps staying the same only changing the page code.

Thats not my fastball, thats my hurry up and get by you pitch... Satchel Paige

 

[phoneguy427]

f60 for general page gives you sets speaker or both option, f611 pages zone one sets, f62 pages overhead speakers, f631 pages sets in zone 1 as well as overhead speakers

 

[sienz]

So, Please help me.

I need to do Feature * 3 and then choose/push the "Page" button and then push feature ??? (to page it through set)

is this the procedure?

Thanks

 

[phoneguy427]

press f*3 then press the button you want to program, then press feature button then 611 for sets or feature button 62 for external or feature button 631 for both or feature button 60 to give you the options. Display will read programmed.