Hello Chaps.
Having my first dabble with one x.
Have installed 1.0.18 on my HTC TYTN II. running windowsbile 6. works ok in personall mode. havent found any problems with the interface that makes me think the install went screwy.
but once i switch to business mode, i get dead tone when i try to dial out.
have 11 valid mobility licenses and im the only one with mobility configured. so that should be ok.
system is an ip 500 running 4.2.11. and i installed an ip500 pri card this morning purely to play with one x.
below is my settings file. if anyone notices any problems with it please let me know:
PRE_IMS=Dial;
LOCATION_NAME = London,UK;
DID_PREFIX = +02073928;
INTERNATIONAL_DIRECT_DIAL_PREFIX = 001;
NATIONAL_DIRECT_DIAL_PREFIX = 0;
HOME_COUNTRY_DIAL_CODE = +44;
ARS_CODE = ;
EXTENSION_LENGTH = 3;
NATIONAL_NUMBER_LENGTH = 11;
USERS_EMERGENCY_NUMBERS = 999;
SETTINGS_PIN = 1010;
ACTIVE_APPEARANCE_SELECT = 459;
AUTO_CALL_BACK_TOGGLE = ;
CALL_FORWARDING_ALL_ACTIVATION = ;
CALL_FORWARDING_BUSY_NO_ANSWER_ACTIVATION = ;
CALL_FORWARDING_DISABLE = ;
CALLING_PARTY_NUMBER_BLOCK = ;
CALLING_PARTY_NUMBER_UNBLOCK = ;
CALL_PARK = ;
CALL_PICKUP_DIRECTED = ;
CALL_PICKUP_GROUP = ;
CALL_PICKUP_GROUP_EXTENDED = ;
CALL_UNPARK = ;
CONFERENCE_ON_ANSWER = ;
DROP_LAST_ADDED_PARTY = ;
EXCLUSION = ;
HELD_APPEARANCE_SELECT = ;
IDLE_APPEARANCE_SELECT = 459;
OFF_PBX_DISABLE = ;
OFF_PBX_ENABLE = ;
SPEECH_ACCESS_NUMBER = ;
SEND_ALL_CALLS_DISABLE = ;
SEND_ALL_CALLS_ENABLE = ;
TRANSFER_TO_COVERAGE = ;
TRANSFER_ON_HANGUP = 467;
SUB_MENU_NAME = Dataquest;
<Voicemail> = *17;
<Conference Bridge> = ;
arsene knows......
everything. apart from the importance of depth in a squad. and what a chequebook looks like......
Having my first dabble with one x.
Have installed 1.0.18 on my HTC TYTN II. running windowsbile 6. works ok in personall mode. havent found any problems with the interface that makes me think the install went screwy.
but once i switch to business mode, i get dead tone when i try to dial out.
have 11 valid mobility licenses and im the only one with mobility configured. so that should be ok.
system is an ip 500 running 4.2.11. and i installed an ip500 pri card this morning purely to play with one x.
below is my settings file. if anyone notices any problems with it please let me know:
PRE_IMS=Dial;
LOCATION_NAME = London,UK;
DID_PREFIX = +02073928;
INTERNATIONAL_DIRECT_DIAL_PREFIX = 001;
NATIONAL_DIRECT_DIAL_PREFIX = 0;
HOME_COUNTRY_DIAL_CODE = +44;
ARS_CODE = ;
EXTENSION_LENGTH = 3;
NATIONAL_NUMBER_LENGTH = 11;
USERS_EMERGENCY_NUMBERS = 999;
SETTINGS_PIN = 1010;
ACTIVE_APPEARANCE_SELECT = 459;
AUTO_CALL_BACK_TOGGLE = ;
CALL_FORWARDING_ALL_ACTIVATION = ;
CALL_FORWARDING_BUSY_NO_ANSWER_ACTIVATION = ;
CALL_FORWARDING_DISABLE = ;
CALLING_PARTY_NUMBER_BLOCK = ;
CALLING_PARTY_NUMBER_UNBLOCK = ;
CALL_PARK = ;
CALL_PICKUP_DIRECTED = ;
CALL_PICKUP_GROUP = ;
CALL_PICKUP_GROUP_EXTENDED = ;
CALL_UNPARK = ;
CONFERENCE_ON_ANSWER = ;
DROP_LAST_ADDED_PARTY = ;
EXCLUSION = ;
HELD_APPEARANCE_SELECT = ;
IDLE_APPEARANCE_SELECT = 459;
OFF_PBX_DISABLE = ;
OFF_PBX_ENABLE = ;
SPEECH_ACCESS_NUMBER = ;
SEND_ALL_CALLS_DISABLE = ;
SEND_ALL_CALLS_ENABLE = ;
TRANSFER_TO_COVERAGE = ;
TRANSFER_ON_HANGUP = 467;
SUB_MENU_NAME = Dataquest;
<Voicemail> = *17;
<Conference Bridge> = ;
arsene knows......
everything. apart from the importance of depth in a squad. and what a chequebook looks like......