Numbering Plan

[ocvd1976]

I have a numbering plan for DID from 140 to 180 on my customer 0 , now i need to update it to 200, Anybody know how i can update it?

Thanks

 

[johnpoole]

sure, just call the provider and buy another block of numbers, be sure that you block number in your range that you may need in the future. thier is no programing in the switch unless your using ld 49, to translate did's..ld 49 prt idc return.. if in use you'll see the digits you recieve and their translated values.. not very common for 3 digit dn's

john poole
bellsouth business
columbia,sc

 

[ocvd1976]

The problem is that i have 2 sites and i share the DID, so in the site 1 i have did 140 to 180 and for the site 2 i have 190 to 240, So i need to set up 140 to 200 for site 1 and 201 to 240 for site 2. Do you have any idea about how i can do it?

 

[johnpoole]

sure, not a problem. are all did's coming into one switch, then routed across tie's? i guess your in an opt 11. if your not sure go to ld 60 do a stat..that's all your t's.. if you have a tie route, go to 80 and do a trad l u on the tie route, if you need to dial 9 then dial the did in the remote and trad the tie trunks...

john poole
bellsouth business
columbia,sc

 

[ocvd1976]

I make the trad and i get the following

ACTIVE TN 001 11
ORIG 001 11 TIE RMBR 2 35
TERM 012 0 00 01 COT RMBR 0 10
DIAL DN 96644248
MAIN_PM ESTD
TALKSLOT ORIG 18 TERM 19
QUEU NONE
CALL ID 0 210
NETWORK CALL ID 0 405


---- ISDN PRA CALL (ORIG) ----
CALL REF # = 11
BEARER CAP = VOICE
CALL STATE = 10 ACTIVE
CALLING NO =
CALLED NO = 10596644248

 

[johnpoole]

can you reach 248 any other way, or do you always have to dial the 7 digit number?

john poole
bellsouth business
columbia,sc

 

[ocvd1976]

That i make was dial from my ext 248 to my DID 9 for the outside call and the DID 664-4248. I trad the loop and get this:

trad 1 10

ACTIVE TN 001 10
ORIG 007 0 00 02 DID RMBR 1 5
TERM 001 10 TIE RMBR 2 34
DIAL DN 248
MAIN_PM ESTD
TALKSLOT ORIG 22 TERM 22
QUEU NONE
CALL ID 0 74


---- ISDN PRA CALL (TERM) ----
CALL REF # = 10
BEARER CAP = VOICE
CALL STATE = 10 ACTIVE
CALLING NO =
CALLED NO = 100248



trad 1 11


ACTIVE TN 001 11
ORIG 001 11 TIE RMBR 2 35
TERM 012 0 00 01 COT RMBR 0 10
DIAL DN 96644248
MAIN_PM ESTD
TALKSLOT ORIG 18 TERM 19
QUEU NONE
CALL ID 0 210
NETWORK CALL ID 0 405


---- ISDN PRA CALL (ORIG) ----
CALL REF # = 11
BEARER CAP = VOICE
CALL STATE = 10 ACTIVE
CALLING NO =
CALLED NO = 10596644248


Thanks

 

[mluckie1]

Go to LD 87 and prt the DSC codes in cdp. To change the numbers that are sent to the remote site that you want to keep remove those CDP codes.

 

[ocvd1976]

Thanks, Its working in my site 1, Now the problem is that only works in the site 1. if i want to call from site 2 to the new extension in the site 1 doesn't work, Appears like doesn't exist. Do you know what i need to do?

 

[mluckie1]

at site 2 you need to add those DSC in ld 87. Prt any current dsc to determine how to program.

 

[ocvd1976]

Thank you very much, its working perfect.