uniqueinstaller
Programmer
I am trying to have the call pilot 150 use the B1 DN , but for whatever reason it's only using the B2, I have it connected to a Mics.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Nortel call pilot 150. When I do a feature 985 it's a B2 Dn that comes up. How can Chg it to B1
- Thread starter uniqueinstaller
- Start date
- Status
allworxguy
Vendor
Does it work? Typically if F985 reports a B2 DN, the B1 side of the port is blown. Try another port on the MICS. If still B2 the port on the CP is blown, if it's a B1 the port on the MICS is gone.
Marv ccna
Sales, Installation & Service for Norstar, BCM, Samsung & Allworx Serving Ottawa and Eastern Ontario since 1990
Marv ccna
Sales, Installation & Service for Norstar, BCM, Samsung & Allworx Serving Ottawa and Eastern Ontario since 1990
- Status
Similar threads
- Locked
- Question
