norstar remote acces codes

[motivatedtek]

Hello
I am looking for remote access code to the norstar on
disa lines/tie lines according to the manuals you can access features through the disa or tie lines if programmed correctly.Including paging,voice mail etc. The model of nostar doesn't seem to matter they all say they can do it
flash *(feature code) doesn't seem right because a caller on a disa line who tried to send a flash would just disconnect themselves. Ultimately what I'm really trying to do is set up centralized voicemail to an avt voice mail connected to a nec pro phone system. I have thought about
just giving the user remote notifcation from the avt but
since the norstar says it supports external/centralized voicemail I would like to give that a shot first. I'll work out the details about how to clear the lamp etc.assuming I can find the feature codes.any help would be appreciated and if I actually succeed I'll post the results thank you all

 

[lugerlover]

i would guess its paging thru a trunk port with a access code "line pool acces or routing" and vm is same as any other trunk

 

[motivatedtek]

Thanks for the response but I mean inbound Disa calls to the norstar and I found what I was looking for at least the book says you just dial the disa access code and then * (feature code) no flash thanks