Norstar C6 CII Module

[Northbaytech]

It has been so long since I have installed one of these Dinosaurs. Caan someone refresh my memory on the programming of these. How do you Log In?

 

[curlycord]

You dont!
Non programmable.

All Call ID is under the usual Admin Option 9 old stuff and Telco features new stuff.




=----(((((((((()----=
curlycord

http://www.curlycord.com

 

[curlycord]

Through Config that is.

=----(((((((((()----=
curlycord

http://www.curlycord.com

 

[curlycord]

or Admin





=----(((((((((()----=
curlycord

http://www.curlycord.com

 

[Northbaytech]

Thanks Curlycord. I thought it was something like SMDR *6 or like that. It's been years.

 

[exsmogger]

The only programming is setting the caller ID set for each line.

Brian Cox
Oregon Phone

http://www.OregonPhone.com

http://www.linkedin.com/in/briancox1952

 

[norstarboy125]

You can program 1 set to be the Auto Info set, which basically displays CLID on 1 phone and the rest won't see the CLID info until after they pick up the phone or use f 811 to view it. They also have call logs and such like the newer Norstar's as well.

Jeremy J. Carter
Charm City Communications

http://www.charmcitycommunications.com

Norstar. BCM. CS1000 Programmer

 

[exsmogger]

Right, one set per line. This is usually the same set for all lines, but doesn't have to be. It would be a different set for a user with a private line.

Brian Cox
Oregon Phone

http://www.OregonPhone.com

http://www.linkedin.com/in/briancox1952