Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
no user response
- Thread starter nortelneo
- Start date
- Thread starter
- #2
NO user rsponse on the BCM is a Network Link issue or a Routing issue. Use the BCM Monitor to check that your IP Trunks are selected when you call the Number. That should
give you an indication that that the routing from the BCM is ok. After that you will have to monitor the CISCO to see what info your receiving.
give you an indication that that the routing from the BCM is ok. After that you will have to monitor the CISCO to see what info your receiving.
- Thread starter
- #4
hi,
I am now able to call the cisco call manager from the BCM. But there is no voice traffic from calls originating from the cisco ccm. From the BCM to the CCM voice traffic is good.
Calls from the ccm to digital sets on the BCM also work fine. but calls from CCM to IP phones on the BCM ring and are setup, but on answering there is no voice traffic.
I am now able to call the cisco call manager from the BCM. But there is no voice traffic from calls originating from the cisco ccm. From the BCM to the CCM voice traffic is good.
Calls from the ccm to digital sets on the BCM also work fine. but calls from CCM to IP phones on the BCM ring and are setup, but on answering there is no voice traffic.
- Thread starter
- #5
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question