Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

MULAP key

Status
Not open for further replies.
JohanW

JohanW

Programmer
Joined
Feb 18, 2009
Messages
1
Location
NL
Can i define a MALUP key manually on a Optipoint 500 basic phone?
 
Sort by date Sort by votes
MULAP is a type of hunt group
You can try to program Hunt Grp join/leave key manually by doing *91 and then navigate to this.
I'm not sure if that works with MULAP's tho... You have to test it
 
Upvote 0 Downvote
No you will need to configure the Mulap in the Manager E program. Also a general call key and a Mulap cannot co exist on the same phone
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Omenas
  • Locked
  • Question Question
OS4K V10R1. DeskPhone CP600 HFA function key name
Replies
2
Views
395
member 1453342
M
kritsadadetc
  • Locked
  • Question Question
OpenScape4000 : Keyset function with call log each line ?
Replies
7
Views
1K
kritsadadetc
kritsadadetc
lisluk
  • Locked
  • Question Question
NAME key
Replies
5
Views
359
lisluk
lisluk
wabe-hk
  • Locked
  • Question Question
How to assign different internal numbers to dial 0 to call acwinIP MQ to different F keys to queue for answering
Replies
1
Views
424
sbcsu
sbcsu
wanyin
  • Locked
  • Question Question
I need cp phone（100&&700） key layout setting in tapro openscape 4000
Replies
2
Views
398
wanyin
wanyin

Part and Inventory Search

Sponsor

Back
Top