Installing UWS on a different subnet on our WAN. I can ping the server, RDP to the server, etc. CAL does not see the server. If I config CAL manually it downloads the client. But then the WS4 still reports it can not locate the server. I did set the following in the client side router...ip forward-protocol udp 7301 and ip helper-address 192.168.0.21 (The server address) ARRRGGG.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Micros 9700 and WS4 on different networks.
- Thread starter gruff68
- Start date
Similar threads
- Question