Merlin Magix 1.5 SMDR Port Baud Rate and other info on Nereus call Acc

[ZeroAdmin]

Greetings from Pittsburgh!

Questions:
What is the Baud rate of the SMDR port on Merlin Magix 1.5 system? My guess is 2400?
What are the pinouts for the SMDR port or should I just get another 355AF adaptor?

I am setting up Call accounting with CTI's Nereus product. If anyone can comment on this please feel free.

thanks,
Brian

 

[TouchToneTommy]

1200-N-8-1

Quoting here:
The pin out sequence is:
Mod Plug                            25 DB male
1                        to                     22
2                        to                    6 and 8
3                        to                     20
4                        to                      7
5                        to                      3
6                        to                      2
7 not used
8 not used

The connections are as follows
RJ45 (9Pin Female)
1 9
2 8,6,1
3 4
4 5
5 2
6 3

I recommend the 355A or 355AF adapter; there is some additional surge protection circuitry inside.

Not familiar with your specified software. Sorry.