Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Merlin Legend Call ID

Status
Not open for further replies.

Jim E

Technical User
Jun 6, 2017
77
2
8
US
I’m running a Merlin Legend Rel 7 in my home. My question is Caller ID only displays on the Primary line. If the primary line is idle, and the secondary line rings, there is no caller id. I’m using MX display phones, the Display Caller ID feature is programmed as a button on every display phone (turned on), and the card is a 408 GS/LS-ID-MLX. I tested the CO lines individually and caller id comes through. Any thoughts? Also, is there a way to permanently keep the Caller Id featured turned on at every phone instead of having to dedicate a button to it?
 
Two quick questions:

Are these true POTS lines provided by an RBOC?

If you swap the lines at the Legend, does the problem follow the line or the port on the Legend?

I [love2] "FEATURE 00
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top