masking outbound cli per call 2

[sekitori]

We have cli on outbound calls, but some of my co-workers want to mask this, depending on who they are calling.

How do I implement this on our system ? We have CM6.2 - is there a feature code for this ?

regards,
Sekitori

 

[sekitori]

Ok, found the CPN-BLK / CPN-UNBLK and the station field 'Per Station CPN - Send Calling Number ?'

Going to find an external line now to test....

 

[montyzummer]

you also have a per call cpn blocking and unblocking code in change features , you could either give them the code or assign two buttons and they press the appropriate button/code dial as per required

APSS (SME)
ACSS (SME)
ACIS (UC)

 

[sekitori]

Thanks montyzummer - i looked for those but couldn't find them.....
Can you tell me where they are ?

 

[montyzummer]

type change features look half way down on page 3 a code for turning cpn on and one for off ,........ as long as its set to yes on your station this will work , you dial the code or press the button get dial tone and dial the number

APSS (SME)
ACSS (SME)
ACIS (UC)

 

[sekitori]

thanks M - found them !

 

[montyzummer]

feel free to share the love with pink ..... have you tested and got it working ??

APSS (SME)
ACSS (SME)
ACIS (UC)

 

[sekitori]

Not tested yet, as I'm waiting for an external land-line to be able to test.

Our cellphone-traffic goes out different trunk/provider so I can't use that either...


No stars until I've tested

Thanks and have a good weekend,


Sekitori

 

[AvayaTier3]

You can also have one callerID used when calling from call-appr and have another callerID
when calling from a brdg-appr.

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]

 

[sekitori]

I enabled the feature-access code with *67, which seems to be generally used for blocking CPN.

Also programmed the softkey-code in the 46xxsettings.txt so our 9620's will display the button when the receiver is lifted off-hook (set dialfeatures '164').
That way you can choose to block CPN when making a new call.

The per-station CPN is blank.

All this seems to work perfectly - Thanks Montyzummer...star coming your way...

regards,
Sekitori

 

[montyzummer]

always appreciated ... pretty cheap of me to ask but glad you got your issue sorted out

APSS (SME)
ACSS (SME)
ACIS (UC)

 

[mattKnight]

pretty mega cheap of me to ask

Monty I think this is what you meant!

Take Care

Matt
I have always wished that my computer would be as easy to use as my telephone.
My wish has come true. I no longer know how to use my telephone.

 

[montyzummer]

matt just cos its you im feeling generous....never may you criticize again

APSS (SME)
ACSS (SME)
ACIS (UC)