Logging into G430 MG using IE

[IrishBlue]

I am trying to use Internet Explorer to log into our new G430 MG. I'm at the part where it states "Enter SNMP paramters" and it states SNMPv1 and the field states "Community". Does anyone know what I need to put in this field?

Thank you!!

 

[keschber]

You will need to go into the CLI via ssh first and enable SNMP and set the community string. use the command snmp-server to do this.


G450-001(super)# snmp-server ?
Snmp-server commands:
---------------------------------------------------------------------------
snmp-server community Enable SNMPv1 service (community based) and
configure read-only and read-write communities
snmp-server dynamic-trap-manager
Set SNMPv3 attributes of predefined dynamic
manager instance
snmp-server enable Snmp-server enable, use 'snmp-server enable help'
for more info
snmp-server engineID Set the SNMPv3 EngineID
snmp-server group Create a new SNMPv3 group (vacm mib)
snmp-server host Set SNMPv3 notification (trap or inform) receiver
and filter
snmp-server informs Set SNMPv3 inform parameters
snmp-server remote-user Create a new SNMPv3 remote user for informs (usm
and vacm MIB)
snmp-server user Create a new SNMPv3 user (usm and vacm mib)
snmp-server view Create a new SNMPv3 view (vacm mib)