loadspeaker paging in G450 1

[Montero84]

Hello,

It's probably a stupid question but here I go. I always use auxiliary trunk board TN763D for loadspeaker / music with G650 gateways... what board/hardware can I use in a G450?

Thanks in advance!

 

[AvayaTier3]

2 wire analog station or trunk pack.
program as station or trunk interface to paging and you will access by dialing a station or TAC for the trunk-group.
trunk-group will be loop-start or ground-start depending on the paging equipment.

whether you use a station or a trunk will be determined by the paging equipment options that are available.

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

36 years Bell, AT&T, Lucent, Avaya
Tier 3 for 26 years and counting

http://bshtele.com

 

[Montero84]

Hello AvayaTier3

So, with the G450 I can't use the TN763D... I think I understand about configuring the analog station or trunk pack for loadspeaker paging. How do I do for music on hold in the G450?

Thanks again for your help!

 

[Montero84]

Avayatier3

If I have an MM711 board in my cabinet, can I hook up the blue pair from one of the ports to a LINE OUT source from a CD player or FM Radio?, if so, how do I configure the analog port?.. just as a regular 2500 stat?.. do I need some type of protection between the port and the line out music source?

Thanks again!

 

[Montero84]

I am confuse.. In the G450 installation guide it looks like I can use a TN763D board, right?... I always use the auxiliary trunk to configure overhead paging or music and is really easy. I am just not sure if I can use the board in the G450.

Thanks!

 

[Montero84]

Ok, I just find the information in the installation guide and its says I can use a TN763 circuit pack.

 

[Montero84]

Ok, now is more clear...

Music-on-hold can be provided:
? Through a port on an MM711 Analog media module to a customer-supplied music source
on a G450 Media Gateway
? Through a port on an MM711, MM714, or MM714B Analog media module to a
customer-supplied music source on a G450 Media Gateway
On a G450 Media Gateway, the music-on-hold feature is connected through a port on an
MM711, MM714, or MM714B Analog media module .
The G450 Media Gateway does not support an auxiliary trunk circuit pack. Therefore, for S8300
Server users, the music-on-hold feature through an auxiliary trunk is not supported. However,
G450 Media Gateway users with an S85X or S87XX Server as primary controller can access
the music-on-hold feature, if their equipment is physically connected to a TN763 auxiliary trunk
circuit pack in an EPN carrier of an S85XX or S87XX system.

So, I go back to my last question...If I have an MM711 board in my cabinet, can I hook up the blue pair from one of the ports to a LINE OUT source from a CD player or FM Radio?, if so, how do I configure the analog port?.. just as a regular 2500 stat?.. do I need some type of protection between the port and the line out music source?

Thanks again!

 

[AvayaTier3]

If tenant partitioning is "n" then you use
Command: change system-parameters features
Music/Tone on Hold: music Type: ext 1001
--------------------------------------------------------------------------------
If tenant partitioning is "y" then you use
Command: change music-sources
display system-parameters customer-options                      Page   5 of  10
                                OPTIONAL FEATURES
Tenant Partitioning? y
--------------------------------------------------------------------------------
change tenant 1                                                 Page   1 of   2

                               TENANT 1

           Tenant Description:

              Attendant Group: 1

        Ext Alert Port (TAAS):

            Night Destination:

                 Music Source: 1

      Attendant Vectoring VDN:
--------------------------------------------------------------------------------
display music-sources                                           Page   1 of   7

                   MUSIC SOURCES

      Source No.   Type   Source                           Description

          1:       music  Type: port  02A1009              ISS AXA Assist
          2:       music  Type: port  001V308              Music Casa
          3:       music  Type: port  004V308              Music DELIVERYS
          4:       music  Type: port  004V308              Music DELIVERYS
          5:       music  Type: ext   1002                 music_on_hold
          6:       music  Type: ext   1003                 music_on_hold2
--------------------------------------------------------------------------------
change announcements                                            Page  14 of  16
                          ANNOUNCEMENTS/AUDIO SOURCES

Ann.                                                                    Group/
No.  Ext.     Type       COR TN  Name                        Q QLen P Rt Port

 1   1001     integ-mus  1   1   20800_Music_AXA             b      n 64 01A14
 2   1002     integ-rep  1   1   music_on_hold               y      n 64 061V9
 3   1003     integ-rep  1   1   music_on_hold2              y      n 64 061V9
--------------------------------------------------------------------------------
Different music for different PNs:

Two sites, PN1 Main Server location and PN2 ESS / LSP Server

On Site A "change system-parameters features"

Music/Tone on Hold: music Type: group 1

change moh-analog-group 1                                       Page   1 of   4
                                  MOH GROUP 1

                          Group Name: Music-on-Hold

MOH SOURCE LOCATION
  1: 01C0806     16:             31:             46:             61:
  2: 02A0805     17:             32:             47:             62:
--------------------------------------------------------------------------------
PN1 users hear the music from 01C0806
PN2 users hear the music from 02A0805 (the nearest music source).
--------------------------------------------------------------------------------

http://www.tek-tips.com/viewthread.cfm?qid=952754&page=7

http://www.tek-tips.com/viewthread.cfm?qid=1595021&page=1

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

36 years Bell, AT&T, Lucent, Avaya
Tier 3 for 26 years and counting

http://bshtele.com

 

[Montero84]

AvayaTier3

Excellent, that is very clear. Just reconfirming.. do I need some type of protection between the port and the line out music source? a resistance or something like that?..

Sorry to bother you.. Thanks again!

 

[AvayaTier3]

Same link

http://www.tek-tips.com/viewthread.cfm?qid=1595021&page=1

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

36 years Bell, AT&T, Lucent, Avaya
Tier 3 for 26 years and counting

http://bshtele.com