Legend upgrade to Magix 3

[tkoon]

We have a customer with a Legend R-7 backup card CKE4 that is being upgraded to Magix 3.0 processor. Can someone help with the download and upload procedure.
Thanks

 

[merlinman]

You must have the latests WINSPM (depending on the Release of Magix)

I can help with the procedure.

Email is:

m e r l i n m a n AT c o m c a s t DOT n e t

Without spaces and WITH correct symbols.

 

[Pepperz]

Before you do, make sure there is no unsupported hardware the Magix software will not recognize. (ATL Phones)

Pepperz@charter.net

 

[merlinman]

If you try to reuse these kind of things, the SPM will tell you.

SAD BUT TRUE !

 

[tweege]

we recently went from a legend 6 to a magix 3. you need to backup your legend to a pc with winspm 8.0. then, use the 'convert' procedure to convert that backup file to a magix 3 file. then you can install the magix processor and do a board renumber so the boards will match what is in the backup file. then, restore the file you converted and everything should come up fine. worked great on the one i did it.

thanks, tim