Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MikeeOK on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Legend Caller ID
- Thread starter fonedude
- Start date
gregarican
IS-IT--Management
To the best of my knowledge you need PRI or Loop Start lines. I just copied and pasted from the Merlin Eletronic Feature Reference Guide below:
"The interface to Caller ID is provided by the 800 GS/LS-ID, 408 GS/LS-ID-MLX, or 412 LS-ID-TDL line/trunk module. These modules support Caller ID only on loop-start lines."
Unless I'm out in left field you probably won't get getting it with ground start lines as broken off part of a T1 circuit.
"The interface to Caller ID is provided by the 800 GS/LS-ID, 408 GS/LS-ID-MLX, or 412 LS-ID-TDL line/trunk module. These modules support Caller ID only on loop-start lines."
Unless I'm out in left field you probably won't get getting it with ground start lines as broken off part of a T1 circuit.
- Status
Similar threads
- Locked
- Question
- Locked
- Question