ldk20 auto attendant message recording 1

[dannyb12345]

This will probably sound like a stupid question, but I cannot find how to re-record the auto attendant message on our ldk20.
Does anyone know how to do it?
Many Thanks in advance.

 

[doktor]

Auto Attendant VMIB Announce # is et in PGM 165.

Description
If this value is set to ON, Auto Attendant is activated.
Value : ON=1 / OFF=0
PROCEDURE
[Trans/PGM]+ 165 + Flex Btn1 + 1(On) + Hold/save.


Description
This value is the number of VMIB announcement played when Auto Attendant is activated.
Value : 00~70
PROCEDURE
[Trans/PGM]+ 165 + Flex Btn2 + 01 + Hold/save (message VMIB 01 has been selected)
Reference
1. VMIB Announcement for Auto Attendant

To re-record:
[Trans/PGM]+ 06 + message VMIB number + # +

///doktor

 

[doktor]

To re-record:[Trans/PGM]+ 06 + message VMIB number + # + Record the new message + Hold/save (save after finished recording).

///doktor

 

[dannyb12345]

Thank you Doktor, much appreciated. The only thing I am now struggling with is the 'message VMIB number' as I am unsure which number to use. I am trying to re-record the main auto-attendant message from the attendant phone.

 

[doktor]

You have VMIB messages 00-70.

When recording from the attendants console you enter e.g. 001 for the message to record. The VMIB message is the 01, since the first zero (0) is to be omitted.

///doktor