IP trunking

[ONsiteengineer]

Hi,

Can anyone post their Trunk group administration for IP trunking between two avaya sytems? I need to compare it to the new one I made. Coz It has problems in caller ID during transfers. Thanks a lot.

 

[Ronster]

Here ye go...

display trunk-group 99                                          Page   1 of  21
                                TRUNK GROUP

Group Number: 99                   Group Type: isdn          CDR Reports: y
  Group Name: IP trunk                 COR: 1        TN: 1        TAC: 896
   Direction: two-way        Outgoing Display? n         Carrier Medium: H.323
 Dial Access? y                Busy Threshold: 255       Night Service:
Queue Length: 0
Service Type: tie                   Auth Code? n
                                              Member Assignment Method: manual


display trunk-group 96                                          Page   2 of  21
      Group Type: isdn

TRUNK PARAMETERS
         Codeset to Send Display: 6     Codeset to Send National IEs: 6
                                        Charge Advice: none
  Supplementary Service Protocol: a     Digit Handling (in/out): enbloc/enbloc

                                                     QSIG Value-Added? n
                                                   Digital Loss Group: 18
Incoming Calling Number - Delete:     Insert:                 Format:

 Disconnect Supervision - In? y  Out? n
 Answer Supervision Timeout: 0

                           
display trunk-group 96                                          Page   3 of  21
TRUNK FEATURES
          ACA Assignment? n            Measured: both
                                 Internal Alert? n        Maintenance Tests? y
                               Data Restriction? n     NCA-TSC Trunk Member:
                                      Send Name: y      Send Calling Number: y
            Used for DCS? y  PBX ID: 1                 Send EMU Visitor CPN? n
   Suppress # Outpulsing? n    Format: public              DCS Signaling: d-chan
                                             UUI IE Treatment: service-provider

                                                 Replace Restricted Numbers? n
                                                Replace Unavailable Numbers? n
                                                      Send Connected Number: y
Network Call Redirection: none                    Hold/Unhold Notifications? y
             Send UUI IE? y                    Modify Tandem Calling Number? n
               Send UCID? n
 Send Codeset 6/7 LAI IE? y

_______________________________________________________________
"There's probably no God. Now stop worrying and enjoy your life." - Bendy Bus

 

[jefflad]

What does this allow you to do?

Disconnect Supervision - In? y Out? n

 

[Ronster]

Dunno!

Supervise the disconnection? But only on Inbound calls?

Maybe you can see who terminated the call? Dunno where you would see this tho'.

_______________________________________________________________
"There's probably no God. Now stop worrying and enjoy your life." - Bendy Bus

 

[AvayaTier3]

Direction: incoming, outgoing, two-way

incoming - Disconnect Supervision - In? y
outgoing - Disconnect Supervision - Out? y
two-way - Disconnect Supervision - In? y Out? y






A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

35 years Bell, AT&T, Lucent, Avaya
Tier 3 for 25 years and counting

http://bshtele.com

 

[ONsiteengineer]

Hi,

On my page 3. i dont have Used fos DCS to 'y'. What is the effect of that if iu change my 'n' to 'y'?

Thanks a lot..

 

[btrain8]

is the trunk group being set up as DCS or QSIG??