Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IP Trunk between CM5 and G3csi

Status
Not open for further replies.
Montero84

Montero84

Technical User
Joined
Jul 17, 2008
Messages
579
Location
US
Hello,

I have tried different ways and with different settings and documentation but I just can't get it to work. Somebody have an example of how to configure an IP trunk between a CM5 and a Prologix G3csiR11? Thanks in advance!
 
Sort by date Sort by votes
The signaling group is in service in both systems. The trunk group in CM5 is in service, however, the trunk group in the Prologix is out of service. In system customer option I can see I have (IP Trunks? y) I am wondering, do I need a Med-Pro in order to have the Prologix to bring the trunk group in service? Thanks again!
 
Upvote 0 Downvote
Correction. the trunk group in CM is OOS/FE-idle. out of service far end idle. Thanks!
 
Upvote 0 Downvote
You're going to need a MedPro circuit pack in the Prologix. Also, what software release is on the csi?
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

A
  • Locked
Looking for Avaya DEFINITY G3csi R6 Tech / Media / Guidance
Replies
4
Views
692
AncientEnterprise
A
Ru_Grey
  • Locked
  • Question Question
Ip office 500 trunk h.323 no ring-back tone
Replies
0
Views
326
Ru_Grey
Ru_Grey
jesryll27
  • Locked
  • Question Question
SIP trunking between Audiocodes SBC M800 to Avaya CM7
Replies
4
Views
458
mattKnight
mattKnight
Scuzzie2k
  • Locked
  • Question Question
IP Office 500 and Avaya Workplace
Replies
2
Views
491
Scuzzie2k
Scuzzie2k
George FA
  • Locked
  • Question Question
traceSM shows no TLS traffic between CM and SM
Replies
0
Views
450
George FA
George FA

Part and Inventory Search

Sponsor

Back
Top