I have a new IP Office that I am trying to use through an Adtran 924E. The SIP is provided by Verizon into the Adtran. Anyone have a sample config for the Adtran they could provide? Even if the model is not the same (IE 908, 916) they should be similar. I have been messing around with it for a while, but haven't had much luck so far. I know the SIP circuit is good, as I am using the FXS(POTS) ports on the Adtran right now into a key system(Partner). I am looking to replace the Partner system with the IP Office, using it in Basic-Partner mode. If anyone has any sample configs they could provide, that would be great. Thanks in advance for any help provided.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
IP Office to Adtran 924E
- Thread starter 84Mike
- Start date