Hey Guys, been lurking here for a while, a lot of great info on this site.
I just got sent an extra IPO 500 v2 unit, I want to create a test environment out of it.
What are the bare bones requirements I will need? I will use 2 IP phones and would like to setup a vmpro as well. I don't think I will be using any type of 3rd party phones..
IP Endpoints
IP500 voice networking channels
power user/teleworker
Preferred edition (VMPRO)
Software upgrade
Sip trunk channels
VCM card
Is there a way to feed off the previous SIP trunk or is a new SIP line required - am I missing anything from that list?
Thanks for your help!
I just got sent an extra IPO 500 v2 unit, I want to create a test environment out of it.
What are the bare bones requirements I will need? I will use 2 IP phones and would like to setup a vmpro as well. I don't think I will be using any type of 3rd party phones..
IP Endpoints
IP500 voice networking channels
power user/teleworker
Preferred edition (VMPRO)
Software upgrade
Sip trunk channels
VCM card
Is there a way to feed off the previous SIP trunk or is a new SIP line required - am I missing anything from that list?
Thanks for your help!