Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IP Office 500 password Change

Status
Not open for further replies.
PDL123

PDL123

Vendor
Sep 17, 2009
39
US
Does anyone have any info on how to access the IPO when someone forgot the password they used during install?
 
Sort by date Sort by votes
1) Get a 9 pin straight through modem cable
2) Hit the person who forgot the password with the cable
3) Connect to the system with the cable using hyperterminal ( settings in help file)
4) Type at-securityresetall
5) Enter the MAC address that is displayed
6) Passwords are now default :)

NTE-wave-logo-for-a4-header.gif
Not happy with Avaya ATM....
 
Upvote 0 Downvote
• Bits per second: 38,400.
• Data bits: 8.
• Parity: None.
• Stop Bits: 1.
• Flow Control: None.

You always try logging in security settings first and changing the Admin password or adding another admin user, as long as they didn't change that too :)

NTE-wave-logo-for-a4-header.gif
Not happy with Avaya ATM....
 
Upvote 0 Downvote
Whoa... the DTE cable should always be last resotr. Which password was forgotten?
 
Upvote 0 Downvote
safe but probably unnecessary (unless they were one of the smart one who actually did change the security access password as well as the admin one).
 
Upvote 0 Downvote
only after you DTE'd only after you DTE'd you DTE'r young whipper snappers just whipping out their DTE cables at the first hint of a problem when I'm expected to write stuff at a million miles an hours and read it twice as fast and someone nicked my DTE cable is what I'd like to think even though I know in reality its probably in that massive pile of cables I need to sort if I get a spare day...
 
Upvote 0 Downvote
unless they were one of the smart one who actually did change the security access password as well as the admin one"

The amount of systems i've seen where the admin password has been changed but the security settings password hasn't isn't even funny anymore. how thick can you be?

ACSS-SME
fo shizzle ma nizzle.
 
Upvote 0 Downvote
It is stupid and it means that the installer or does not know it or is too stupid to think about it!
When you change one then you need to change all.


BAZINGA!

I'm not insane, my mother had me tested!
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Scuzzie2k
  • Locked
  • Question
IP Office 500 and Avaya Workplace 1
Replies
6
Views
643
derfloh
derfloh
newbietechman
  • Question
IP Office 4
Replies
8
Views
520
Westi
Westi
Mike Sadowski
  • Question
Transferring all configuration settings from one Avaya IP Office 500 V2 to another?
Replies
3
Views
286
Westi
Westi
TnPtech
  • Question
Avaya IP Office -IP phone issue. 2
Replies
17
Views
772
MikeeOK
MikeeOK
4thright
  • Locked
  • Question
IP Office 500 v2 - T1 Trunking
Replies
14
Views
1K
derfloh
derfloh

Part and Inventory Search

Sponsor

Back
Top